Morphologic MPL3A System on FPGA module
Now available, the MPL3A module using a Xilinx Spartan-3 FPGA is available for use in system on FPGA designs.
The MPL3A module contains all the basic hardware components that you need for an embedded system.
Add to that the required "soft" components or IP cores you need - including custom functions and you have a system on module solution
for your embedded system. The module has suficcient amount of programmable IO pins to enable most small to medium embedded systems to
be implemented on the module.
- Xilinx Spartan 3 FPGA (3 sizes
available: 200, 400 and 1000 kgates).
- A 133 MHz DDR SDRAM chip with up
to 128 Mbytes capacity. 350 Mbyte/s bandwidth.
- An Atmel Dataflash with up to 8
Mbytes capacity storing FPGA configuration as well as programs and
data. Flash is pre-loaded with a bit image, boot loader and linux.
- Clock generator for generation of
3 local and 2 external clock signals.
- A supervisor chip used for system
configuration, watch-dog and 10-bit analog input functions.
- A real time clock and calendar
with the possibility of turning on the system at a specific time.
- 1.2 and 2.5V power supply
circuitry with 3.3V input voltage. These voltages are available on
the connector and can drive additional circuitry.
- Two 100-pin board-to-board
connectors with 101 IO pins available from the FPGA as well as JTAG,
power, SPI, analog input and auxilary clocks.